Fermax 5293 keypad for access control with integrated proximity reader for EM, MIFARE and HID cards / key chains.
What are the main features of the keyboard with proximity reader 5293 from Fermax?
- Capacity up to 600 users
- Dispose of:
- Output relay 2A configurable from 1-99sg (5sg by default) or flip-flop (when presenting the card the relay is activated and when it is presented again, it is deactivated).
- Door open sensor input.
- Input push button output.
- Alarm- output (negative output that allows to activate a relay ref.2013).
- This keyboard allows up to 4 different types of access:
- Single card
- Card + PIN.
- Card or PIN (default)
- Multi-card, PIN. Presenting 2 to 9 valid cards or pins will open the door.
- Appearance
- 3 mm aluminum
- Surface fixing system.
- Hidden screws
- IP66
- Surface mount (55 (H) x 147 (V) x 20 (P) mm.
What technical specifications does the keyboard with proximity reader 5293 from Fermax have?
- Feeding:
- 12-28 Vac / cc
- Centralized: 12Vdc.
- Consumption rest:
- 12Vdc / 65mA
- Operating temperature: [-20ºC, + 60ºC]
- Humidity: [10%, 90%]
- Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards / keychains
- Configurable in Wiegand 26 proximity protocol and 8-bit burst keyboard format.
- Relay (autonomous) 2A (C, No, Nc)
- RF radiated power: 125KHz: 4.382dBuA / m, 13.56MHz: 2.02dBuA / m.
- Autonomous wiring (with integrated controller)
- (Red): Positive power supply 12 ~ 28VAC / DC
- (Gray & black): Negative power supply 12 ~ 28Vac / cc
- C (White & black), NO (Blue), NC (Green & black): Potential free relay. C_common, NO_Normally open, NC_Normally closed.
- GND (Black), SP (Brown): door sensor
- GND (Black), BS (Yellow): zaguán exit button
- Alarm- (Gray), ~ (Red): alarm output <200mA
- Centralized Wiring
- (Red): Positive 12Vdc power
- (Black): Negative power supply 12Vdc
- DT (D0) (Green), CK (D1) (White): Wiegand26 connection
- G (LED) (Brown): Led control.
- Buz (Beep) (Yellow): acoustic signal.