Technical Specifications of the NewSai 9110 WIN PRO 2K 2000VA/1800W UPS
| Specifications | |
| MODEL | 9110 WIN 2K (L) |
| CODE | 46021 |
| POWER | 2000 VA/1800 W |
| Single Phase INPUT with Ground | |
| Voltage Range Minimum Transfer | 180 VAC / 150 VAC / 130 VAC / 120 VAC ± 5 % |
| (based on load percentages 100% - 80% - 70% - 60% - 10%) | |
| V. Minim and Max Return | 180 VAC ± 5 % - 300 VAC ± 5 VAC |
| Frequency range | 40 Hz ~ 70 Hz |
| Power Factor | ≧ 0.99 |
| EXIT | |
| Voltage Regulation (Battery Mode) Frequency Range (Synchronization Range) Frequency Range (Battery Mode) |
±1% 47.5 Hz ~ 52.5 Hz or 57 Hz ~ 63 Hz 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz |
| Crest Current | 3:1 ≦ 3 % THD (Cargas Lineales) |
| Harmonic Distortion | Linear Zero |
| AC to DC" | 4 ms (Típico) |
| Transfer time Inverter to By-pass | Pure Sine |
| Output Wave (Battery Mode) | |
| EFFICIENCY | 90% |
| In AC mode | 88% |
| In Battery Mode | |
| BATTERIES | 4 x 12 V / 9 AH |
| Battery No. and Type Typical recharge time Amp. Charger (max.) Standard Models Charging Voltage Battery Number and Type Amp. Charger (max.) Charging Voltage |
4 hours to recover 90% capacity |
| 1.0 A | |
| 54,7 VDC ± 1% | |
| Depends on the capacity of the external batteries | |
| 6.0 A | |
| 54,7 VDC ± 1% | |
| INDICATORS | UPS Status, Charge and Battery Level, Input/Output Voltage, Discharge Time and "Failure conditions |
| LCD Panel | |
| ALARMS | Beep every 4 seconds |
| Battery Mode | Beep every second |
| Low battery | Beep every 0.5 seconds |
| Overload | Continuous Beep |
| Failed | |
| PHYSICS | 410x438x88 [2U] 19 |
| RACK 19'' Dim models, D X W X H (mm) . Net Weight (kgs) |
|
| OPERATING ENVIRONMENT | 20-90 % RH @ 0- 40°C (non-condensed) Menor que 45dB @ 1 Metro |
| Humidity Noise level |
|
| SOFTWARE CONTROL | Soportan Windows 98 SE/ME/NT 4.x/2000/2003/XP/Vista/2008 SNMP/Web card slot for web browser control |