To install a plate it is necessary to place a box on the wall or wall where we will later fix the plate.
The flush-mounted boxes are made of aluminum and zamak and have hinges hinged in any direction, which allow the plate to be held while the wiring is being made.
They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
The flush-mounted box 8852 by Fermax is a flush-mounted box of size S2 for the installation of a street panel.
What technical characteristics does the 8852 flush-mounted box have?
To install a plate it is necessary to place a box on the wall or wall where we will later fix the plate.
They are made of aluminum and zamak.
They have folding hinges in any direction, which allow to hold the plate while wiring is done.
They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
One set is required for each additional plate that is installed between the flush-mounted boxes.
Recessed box
Series 2
Measures: 115x138x 45 mm (horizontal-vertical-depth).
