Do you want to install a street sign? To install a plate it is necessary to place a box on the wall or wall where we will later fix the plate.
The flush-mounted boxes are made of aluminum and zamak. They have folding hinges in any direction, which allow to hold the plate while wiring is done. They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
This flush-mounted box is only compatible with S4-size boards.
The flush-mounted box 8949 allows the installation of an entrance panel of size S4.
What technical characteristics does the flush-mounted box 8949 have?
Recessed box
Made of aluminum and zamak.
They have hinges hinged in any direction
They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
In the case that several plates are combined, always of the same series, it is necessary to use a set of separators for a perfect coupling.
One set is required for each additional plate that is installed between the flush-mounted boxes.
