Nice Z-Wave Smoke Sensor

The Fibaro smoke sensor is designed to operate in confined spaces, under normal conditions (no smoke, dust, condensed water vapor).

What are the technical characteristics of the smoke sensor?

Compatible with any Z-Wave or Z-Wave controller +
Supports protected mode (Z-Wave network security mode) with AES-128 encryption
Extremely easy installation - simply install in a location prone to tripping
Battery operated
3 levels of sensor sensitivity
Built-in case opening detector
Alarm is signaled with sound, visual indicator and Z-Wave control command
Programmable over-temperature warning
Automatic test performed every 10 seconds
Batteries: CR123A battery, 3.0V DC
Operating temperature: 0 ° C to 55 ° C
Operating humidity: 0% to 93%.

Measured temperature range: -20 ° C to 100 ° C
Temperature measurement accuracy: 0.5 ° C (within the range of 0-55 ° C)
Compliance with EU directives: EN 14604:2005/RED 2014/53/EU/2011/65/EU
Radio protocol: Z-Wave
Radio frequency:

868.4 or 869.8 MHz EU
908.4 or 916 MHz US
921.4 or 919.8 MHz ANZ
869 MHz RU

Radio signal strength: up to -5 dBm (EIRP)
Distance:up to 50 m outdoors up to 30 m indoors depending on terrain and building structure
Dimensions (diameter x height): 65 x 28 mm