The fixed base for the turret 175mm is placed under a lower section by the screw to support dynamic normal workloads. We have to choose the location of the base and the anchor points of winds on the ground taking into account the height of the turret to install to determine the distances from the base to the anchors.
This turret also has a steel tube 20 mm and corrosion protection.
This type of gun turrets are used in areas in which a great height is needed to install our antennas as there are buildings or trees that prevent a direct connection between our antenna and repeater, producing an shaded areas, causing us to have interference and even complete loss of the image on your television.
This stretch is fixed base of the turret, required for installation of the same as it is the part of the structure which is screwed directly on the ground. For installation of a turret you can choose different combinations, depending on the height you need, we can "play" with the installation of the sections we want, for example:
Base - intermediate - higher.
Base - top, if we need high, but not too much.
Base - intermediate - intermediate - upper, if we need a considerable height.
In addition to these conjugates, we can choose many more combinations, provided the bolted go down Base and upper end is the upper section.
