Intermediate device for 2-wire DUOX PLUS systems with function of Feeder, Distributor and Signal Regenerator.
The equipment has different operating modes as required in the installation:
Risers only mode (monitors+regenerator): this equipment allows to have 2 risers powered and with regenerated signal. The total consumption of the devices must not exceed 2.5A from the source.
Risers+panels power supply mode (monitors+panels+regenerator): it allows powering the board as well, provided that the total equipment does not exceed the amperage of the source (2.5A).
Signal regeneration mode: the device will boost the signal without additional power.
Another of its functions is that of Isulation: the equipment connected to each of the ports is not affected by a short circuit in the other ports.
DUOX PLUS Regenerator with 2 outputs for signal supply, distribution and regeneration
What are the main characteristics of the Fermax DUOX PLUS 3269 Regenerator?
POWER SUPPLY, SIGNAL DISTRIBUTION AND REGENERATION:
The device allows two risers powered with a regenerated signal to be available (the same as when it is generated by the panel or the terminals). Risers only mode: The total consumption of devices (monitors+regenerator) must not exceed the source amperage (2.5A).
As an option, it also allows the panels to be powered as well. Risers+panels power supply mode: The total consumption of devices (monitors+panels+regenerator) must not exceed the source amperage (2.5A).
It is also possible to strengthen the signal accurately without the need to supply additional power. Signal regeneration mode: If the level of signal needs to be strengthened at an installation point, the regenerator can be used without an additional power supply. For more details about this and other topologies, please consult the DUOX PLUS Technical Book Code 970122b.
INSULATION:
The equipment that is connected to each of the ports will not be affected by short circuits or other problems with the other ports.
