To install a plate, it is first necessary to place a box in the wall or wall where we will later fix the plate.
The Fermax 8854 built-in box is made of aluminum and zamak. It also has a hinged hinged in any direction, which allows to hold the plate while wiring. This flush-mounted box has circular marks on the bottom of the box, which are punctured with a light blow or pressure, thus allowing the cables to pass through.
The Fermax 8854 flush-mounted box allows the installation of a 4-series City model street sign.
In the case that several plates are combined, always of the same series, it is necessary to use a set of spacers for a perfect coupling. One set is required for each additional plate that is installed between the recess boxes.
This recess box measures 115x185x 45 mm (horizontal-vertical-depth).
The box 8854 is recessed, that is, we have to have a hole made in the wall to be able to install, however, if we want to install it on the surface, we will have to use a box for surface, as can be The box 7064 of Fermax, also of the Series 4, which we can find in the following link.
There are also other accessories that can be installed in our street plate, such as the visor of the series 4, perfect to protect our plate from the sun or rain. In this case we will need the Visor 8403 from Fermax.
