Fiber protectors for 45mm fusion (Bag of 12 units)

OFP's fiber optic protector is used to cover and protect the fusion made in our fiber optic splice, to insulate it and ensure that it cannot break.

1. First, we remove the sheath from one end of the cable.
2. We introduce the heat shrink protector through the cable.
3. Next, we remove the secondary protective sheath at each end of the fibers.
4. We also remove the acetate coating. Always being careful not to cut the fiber.
5. Clean with isopropyl alcohol the fiber of the cable and cut with the cutter and do the same with the other cable to be spliced.
6. We place the clamps with the fibers in the guides to the left and right of the splicer, always making sure that they do not mount the ends.
7. Turn on the fusion machine and select the appropriate program. If we want a low loss fusion, we select the fusion by cores.
8. Finally, and once the fibers are joined, we introduce the heat shrinkable tube in the oven of the machine itself.