| Power supply: | Battery or 12–24V DC supply (LPS or NEC class 2) |
| Battery type: | CR123A/CR17345 battery, 3.0V DC |
| Power consumption (at VDC operation) | 0.4W |
| Output terminals maximum current carrying capacity: (ALARM NC, TAMP NC) |
25mA |
| Maximum voltage at output terminals: (SMOKE NC, TAMP NC) |
24V DC / 20V AC |
| EU standards compliance: | RED 2014/53/EU RoHS 2011/65/EU |
| Radio protocol: | Z-Wave Z-Wave+ (firmware 3.2 or higher) |
| Radio frequency: | 868.4 or 869.8 MHz EU; 908.4 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU; |
| Radio transmit power: | up to -5 dBm (EIRP) |
| Range: | up to 50 m outdoors up to 30 m indoors up to 40 m indoors (firmware 3.2 or higher) (depending on terrain and building structure) |
| Operational temperature: | 0°C to 40°C – battery powering mode -20°C to 70°C – VDC powering mode |
| Measured temperature range: | -20°C to 100°C |
| Temperature measuring accuracy: | 0.5°C (within 0 – 40°C range) |
| Dimensions (diameter x height): | 72 x 28mm |
Fibaro Z-Wave Flood Sensor FGFS-101
SKU
FIBFGFS101
Brands: Fibaro
Availability: In stock
24/48 Hours
Wireless Z-Wave Fibaro FGFS-101 Flood Sensor
The Fibaro Flood Sensor is a Z-Wave compatible flood and temperature sensor. This sensor is commonly installed in the bathroom and kitchen, where there is a higher risk of flooding. The sensor supports two modes of operation: flood + temperature or temperature only.
The temperature sensor is very useful to set an optimal temperature in the bathroom, before showering or showering children. On the other hand, the tilt sensor notifies you immediately if any tampering attempts are detected or if the sensor is moved from its original location.
The device is designed to be placed on the floor or on the wall with a flood sensor probe extended by a connected cable. The device has a built-in visual LED indicator and an acoustic alarm.
