5G LTE exterior filter to adapt your DTT system to the 2nd Digital Dividend. Filter with external housing to place on the mast of the UHF antenna, always install before the internal amplifier or mast.
This low pass filter with a large rejection of 50dB from 690 MHz eliminates all interference caused by the 5G frequency band of the new dividend in single-family homes.
50dB outdoor 5G LTE filter for adaptation to the second digital dividend in single-family homes.
What technical specifications does the 50dB LTE 5G FIL-LTE50EXT/2L LTE filter have from Tecatel?
Low pass filter with 50dB rejection at 690 MHz
Input: 1x F female
Output: 1x F Female
Installation: Outside
LTE: LTE2 / 5G (2nd Digital Dividend)
DC current step: Yes
Ideal for single family housing
How to install an outdoor LTE filter?
It is always recommended to install the 4G/5G LTE filter prior to the amplifier to prevent it from amplifying the signals that interfere with DTT programming. In this case it is an external filter, so it can be placed on the mast next to the antenna and then place the mast or indoor amplifier. This filter has DC current pass to power active antennas that require it, so if it is your case you will not have problems in this regard. 2 "F" type male connectors are required for connection (not included).
