The LTE-cut filter channel 60 ED1602 of Daxis, allows the elimination of the frequency band intended for 4G technology due to rejection of 20 dB which produces this filter.
What has the technical characteristics of Daxis filter ED1602 LTE?
Allows the frequency step between 5 and 782 MHz.
It allows the passage of current up to 300 mA maximum.
Insección loss of 1.5 dB.
Rejection of 20 dB to block the signal path of 4G technology.
Where I can install the LTE filter?
ED1602 LTE filter of Daxis is installed inside the housing, and that does not incorporate chest so that when installed on the outside is protected from inclement weather.
What role has an LTE filter?
An LTE filter is a lowpass filter to be used in the DVB-T reception facilities if they want to keep the old UHF antennas without danger of interference from stations of the new 4G mobile phone standard.
These filters are only required for existing facilities as for new installations in urban or rural areas, antennas and amplifiers sold from the application of the new rule should already be configured to receive good signal gain only TV channels 21 to 60 of the UHF band, being attenuated the other top (the old TV channels 61 to 69).
