SRC Multiswitch 5 inputs and 4 outputs 9744SKY Johansson for up to 64 recipients
The digital multiswitch SRC 9744SKY johansson 4 outputs allows connection of up to 16 different receivers for each of its outputs as long as these receptors are set to unicable, assigning to each of the receivers a different frequency, as shown in the table printed on the product, using the current regulations of unicable2.0 to 16 receivers, but also to connect normal receivers, unicable 1.0 and Sky receivers.
The multiswitch are key elements in the distribution of satellite signals via coaxial cables. Although there is only one available coaxial cable in the tube that enters the apartment in many cases.
What allows digital multiswitch SRC 9744SKY Johansson?
The digital multiswitchSRC 9744SKY Johansson to connect several receivers or STB (set top boxes) for multiroom applications or numerous satellites using a single coaxial cable.
Enabling router mode unicable in multiswitch we can simplify and reduce the cost of installing the satellite service.
The digital multiswitch Johansson 9744SKY offers the following technicalcharacteristics:
SCR has 4 outputs and 1 statute.
It has 1 terrestrial input and 4 satellites.
8 dB return loss.
Has flashing multicolored led
Automatic detection of SCR mode.
Compatible with all legacy decoders.
active and passive diplexer land.
Soporto the channel plan of the family operators Sky Europe.
Frequency range 88 to 2150 MHz.
It has a grounding.
It supports DiSEqC.
It works at a voltage of 10 to 20VDC.
This multiswitch allows to connect to the satellite receivers output up to 16, ie 64 in total if the receivers configured as unicable, configuring each with a different frequency so that no overlap and no interference.
If we want to connect a standard satellite receiver without unicable mode, this multiswitch gives us the option to connect a single receiver output, ie 4 satellites receivers in total, as well as allowing combine the outputs to connect unicable receivers in one and receivers normal in another.
