Precision stripper for fiber. Ref. 2324 of Televes.
Precision stripper for fiber optic cable. The fiber cable is protected by a very thin layer of plastic that must be removed in order to carry out the fusion. This type of precision work can be done with this peeler.
With this stripper we can remove both the outer and inner coating of the fiber. It can be used for fibers of various diameters, such as 250 µm and 900 µm.
This tool is used by installers for the preparation of the fiber, when it is necessary to do fusions. It has an ergonomic yellow control, with a rubber finish, which makes it comfortable to use.
Technical Specifications of the precision peeler for fiber. Ref. 2324 of Televes.
Precision stripper for fiber optic cable. The fiber cable is protected by a very thin layer of plastic that must be removed in order to carry out the fusion. This type of precision work can be done with this peeler.
Stripping and cutting tool that allows to quickly, safely and accurately remove both the cover and the different coatings applied on the fiber (900 and 250µm).
It has 4 work areas to offer greater versatility and avoid the exchange between tools:
Cutting area (4): facilitates cutting the fiber or its outer sheath Area for the removal of the fiber cover (3): Allows the removal of protections between 3 and 1.6mm in diameter Area for removing the 900µm protection/coating (2): Allows removal of the 900µm coating, reducing the diameter of the protection to 250µm Area for removing the 250µm protection/coating (1): Allows removal of the 250µm coating, reducing the diameter of the protection to 125µm (working diameter for fusion)
