The S6 flush-mounted box by Fermax is used to install a plate on the wall or wall.
Fermax flush-mounted boxes are made of aluminum and zamak. They also have hinges hinged in any direction, which allow to hold the plate while wiring is done.
At the bottom of the box, they have split circular marks, which are pierced with a slight blow or pressure, thus allowing the passage of the cables.
The framing box 8856 of Fermax is a flush-mounted box of size S6 for the installation of a street panel.
What technical characteristics does the 8856 flush-mounted box have?
To install a plate it is necessary to place a box on the wall or wall where we will later fix the plate.
They are made of aluminum and zamak.
They have folding hinges in any direction, which allow to hold the plate while wiring is done.
They have circular marks split into the bottom of the box, which are punctured with a slight blow or pressure, thus allowing the passage of the cables.
One set is required for each additional plate that is installed between the flush-mounted boxes.
Recessed box
Series 6
Measures: 115x280x 45 mm (horizontal-vertical-depth).